| Customization: | Available |
|---|---|
| Warranty: | 1 Year |
| Type: | Horizontal |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product parameter of GB4240Z60
|
Model |
GB4240Z60 |
|
|
Max. Cutting Diameter |
0° cutting diameter 400 |
mm |
|
60°angle material 400*200 bar220 45°angle material 400*500 bar400 0°angle material 400*500 bar400 |
mm |
|
|
Blade Speed |
20.31.45.63.84 |
m/min |
|
Blade Size |
1.1*34*4960 |
mm |
|
Motor Output |
4 |
kw |
|
Hydraulic Pressure |
0.75 |
kw |
|
Coolant Pump |
0.09 |
kw |
|
Machine weight |
1.08 |
ton |
|
Size of outward |
2500*1900*1750 |
mm |
|
Vice clamping |
Hydraulic |
|
|
Blade tension form |
Manual |
|
|
Feeding cut adjust way |
Hydraulic |
|
|
Feeding way |
Manual |
|
|
Hydraulic cooling way |
Water cooling |
|
|
Chip conveyor way |
Manual |
|
|
Voltage |
380V 50HZ 3Phase |
|
main feature:OEM/ODM band saw machine in the philippines angle cut 45 degree band saw machine GB4240Z60
Main transmission part: This part consists of worm wheel box, triangular belt wheel, main motor, saw wheel, etc.. The main motor drives the triangular pulley through the worm wheel box to slow down, and then drives the saw wheel to rotate. The saw bar drives the drive wheel to do the cutting movement.
Saw frame part: The saw frame is welded by a combination of rectangular steel pipe and A3 steel plate. The main transmission part and tension part are mounted on the guide part. Therefore, the entire saw frame should be uniform and slightly deformed.
Rotation part: The rotation part consists of a rotating seat, a turntable center, and a bearing. The rotating seat is a beam-shaped structure of HT250 cast iron. The structure is simple and generous, and the force ability is strong. It can be rotated at an angle by connecting a column, a column cover and a saw frame.
Saw bar tensioning part: a set of saw bar tensioning device composed of tensioning seat, tensioning slider, Zhangjinsi rod, tensioning handle, hollow adjusting screw, etc., used to saw the tensioning and relaxation of the bar. At the same time, through the hollow adjustment screw on the tensioning seat, the position of the saw bar relative to the saw frame beam plate can be adjusted to suit the optimal working state of the saw bar.
The guide part: the guide part is divided into the guide part of the saw frame and the guide part of the saw strip;
Saw frame guide: a large diameter chrome-plated column and a small square tube assisted column are combined to make lift guide. The guide part of the saw bar is composed of a guide arm and a pair of guide heads. Through the guide arm, the saw bar is twisted into a vertical state on the table. The guide head device can adjust the holding tungsten sheet to ensure the sawing accuracy.
The workbench part: This part consists of a fan-shaped workbench and a bed body clamping part. The bed body is connected with a fan-shaped workbench. The bed body is installed in the second half of the base. The bed body is mainly used to place the workpiece. The workpiece is clamped by clamping the vise and then sawn. The edge of the fan table is equipped with a scale through which the user can cut the workpiece at an angle.
Electrical control system: The electrical system consists of transformer, contactor, heat relay, Fuse, button, stroke switch, connection wire, etc.. It is used to control the lifting and lifting of the saw frame, the clamping of the vise, and the starting and stopping of the host machine.
Hydraulic system: The hydraulic system composed of electromagnetic valve, oil cylinder, speed regulating valve, rotary valve, tubing, fuel tank, etc.. Through the electrical system control, the required action of sawing is performed.
Cooling system: the cooling fluid is drawn to two cooling points through the cooling pump, the saws are cooled and the sawdust is washed to ensure the sawing is stable and smooth.
details display
details display
Client`s special requirement will be welcome!
){kind=link}